Copie paste motorforum
http://www.motor-forum.nl/forum/list_messages/346663/Datatool-alarm-loeit-de-hele-dag-1.htmlGoing through the de-spike routine
Technique for anyone who may have the same problem -
1. Remove lid from main alarm unit.
2. Remove internal battery link from PCB
3. Remove alarm inline fuse
4. Unplug PCB from alarm loom
Leave out for at least 6 hours to drain
With the bikes battery still in place and fully charged.
1. Plug PCB onto loom and reinstall
2. Replace In-Line fuse.
3. The alarm will sound for a period of approx. 30 seconds.
4. Allow the system to reset itself.
5. Replace internal battery link onto PCB.
6. Make sure all connections are complete and replace lid
7. Disarm system as normal (this may take up to 3 presses as system realigns itself) or re-align remote by holding both buttons for 5 seconds depending on model
should be alive and alarmed again.....
Edit:
Gezien de urgentie/ergernis zou ik er zelf een gat inschieten want bovenstaande begrijp ik zelf geeneens.